Thanks for your time guys it is appreciated
Originally Posted by HuFlungDung  .0001" or .01mm |
0.0001" = 0.00254mm
0.01mm = 0.0003936996"
If we are talking 0.0001” resolution, is that 0.0001”/full step or per micro step?
I think I am right to say many people converting a mill to CNC use 0.2” pitch ballscrews with direct drive. So they will have a resolution of 0.001”/full step. Is this number well within the range I would need for a CNC mill? I am looking at two options that would give me around 0.001”/full step or 0.0005”/full step, is 0.0005” over kill on a hobby CNC mill?
John