I chamfer meh holes before I thread them. Usually .015 or so bigger than the major dia. Pretty much anything left after that, like razor edges or small burrs can be taken off with scotch-brite or what ever.
'Rekd
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Last edited by Rekd; 05-06-2004 at 09:45 PM.
|