Originally Posted by Robin Hewitt  Unfortunately I blew $13k on a Baker rifle so I now have to wait until her indoors wants something equivalent before it's my turn again.
I don't need software to do the actual machine control, I just need to convert dxf to tool paths and G codes.
I have downloaded Cambam instantly plummetting to the botttom of the learning curve, doubtless I shall still be using gsimple for the forseeable future  |
If you've got £85 to spend then I can highly recommend SheetCAM for 2.5D stuff - check out
www.sheetcam.com
Cheers.