Well, I worked on a headstone for Lucky. This was cut in Delrin using my CNC machine in my shop. I made an adapter to mount a Dewalt 3HP router to the head. The software I used takes a picture and makes a 3-D tool path. It took about 1 minute from the time I had the picture to generate the code. The machine took about 2 hours to cut it.
Added some "TEXT" and paint and it is now at his final resting place just 20 feet from the shop door.
Thanks for all the well wishes and help from everyone especially "dertsap".
I started with this picture: (I had to remove the grout lines)
