We have a Haas super vf4 high speed and a Vf5 regular The Hsm Vf4 is way faster tool change and doesnt slow down at all,we also have the probing on both machines a must have in my opinion way faster setups. Plus we do alot of casting that we probeach part to change workoffsets we use to edge find each part. My job is way easier. As far as the Vf4 Hsm its way beter I think. The tool change will change at 5%,25%,50%and a 100% which is fast. The nice thing is when I am running the Indexer if my tools are long and i get nervous I can run it at 5% and it will stop in middle route with feed hold button, The vf5 will not stop and there is only 1 tool change speed. |