Originally Posted by DeWalt58  Thought I'd post pictures of the Keling stepper motors that I'll be using for Joes 2006 R2, They are KL23H286-20-8B, 3A, 8 wire, 425 oz. rated. I'll be running them in a 6 wire unipolar mode with a HobbyCNC Pro 4-Axis board using a 24VDC switching power supply.
dewalt58 |
Same motors and controller I have - seems to work well, but I've only run the Y-axis and that only 'in air'. I've got 38 volts on mine, and it seemed to make a significant difference just going from 35 to 38 volts, but I don't know - there may have been some other factor involved.
Gary