[wms]

HU,
I believe your right. The machine time appears to be tied to the cad drawing not the post.

I did a test and here are the results:

z-level rf at .025 depth of cut: time 6 hours 40 minutes.
same at .050 depth: time 5 hours 42 minutes

then radial finish at feed of 24.: time 5 hours 42 minutes
same at feed of 40.: time 5 hours 9 minutes
then same with feed at 80. : time 4 hours42 minutes

So it appears that my system (or circumstances) is at the very least making changes to the time sheet.