Things I recently bought:
9x49 Kent 380 turret mill with 6" vice and 2 axis DRO. $950 "buy it now" on ebay in Grand Rapids.
Sheldon 15x32 Lathe 1970ish worn bed and leadscrew, but Anilam DRO, 3 chucks american made, wedge QC toolpost, 5C collet chuck, collets and a bunch of miscelaneous bits and pieces. $900 from Gahr Machine Co in Cleveland OH.
6x18 Gallmeyer & Livingston surface grinder with AC chuck / demagnetizer hydraulic control in perfect condition (1950's with original paint - looks good too) $500 from Gahr Machine Co in Cleveland OH.
In addition, I got a Hitachi 3hp VFD to provide the "juice" to the above machines. I may have a voltage problem with the Lathe, but I have to figure that out first....
Keith |