[project5k]

hey Mcgyver.. ok, first of all, YOU STOLE MY NAME!!! hehehe but seriously, thats exactly how i spell it, and infact is my email address... has been for years and years.. anyway.. no biggie...

ok, so i got to thinking bout your built up stack of disks.. interesting idea, much simpler to build.. my only worrie would be if one of them spun on the final mounting shaft... i guess i could use something like allthread, and put a nut between each one.. that would clamp them in place pretty good i would think... anyway.. heres a couple decent pics of what i'm building... its a pump of sorts.. motor spins cam, rockers rock, pistons go up and down..

the pivot point i was referring to was for the rockers.. in the final design the pivot plate in the picture will be open above the rockers, but in these drawings it looks like the rockers are going through the plate...