Originally Posted by Chad_Clark  What is it that you are having trouble with exactly. I would be glad to help you out. I am sorry that you seem to be having trouble at this time, but I am sure I can help you get pass that. Just let me know what I can do for you. |
Chad,
Part of the problem was your former employee Rodney that went back to BCC. He promised us posts for our machines and only did one for the Anilam 1400 and it does not work! I did get the spindle to turn after working on the post, the cutter comp does not work because it needs a XY move immediately following the G41 or G42. The post outputs G4* preceding GO3 and this will not work.
FYI, we have BCC and the only good version was the old DOS version.