Originally Posted by PBMW  Hmmmm....My SL10 does the same thing except the interval between alarms in completely random. I'll get a lot of alarms one day and none the next. Pressures good at teh gage as well. We have tried clearing the lines as well. |
See if you can figure out whether the 'random' correlates with the end of a cycle or something like that. I seem to recall reading somewhere in the manual that the controller may detect a low lube level or pressure but it will not activate the alarm until the end of any cycle that is running.
I know we had a Minimill that started giving lube alarms about a year ago and I told my guys to hit Restart and ignore it for a few weeks. It went away and I wonder if it was just a temperature thing or something, the weather was hot.