Originally Posted by joe2000che  Got the machine moved into its location, leveled with the Jack screws and used some angle for the adjustment feet.
Also got the walls up for the 8'x8' room it where it will sit (still have enough room to park truck in garage, All the walls are up except the rear, waiting for the belts to arive tommarrow from sdp-spi, to couple the two leadscrews together, to make sure the Gantry stays square incase one motor misses steps hoepfully the other motor will help it along. in one of the pictures you can see the shelf the computer and driver boards in a computer case.
Also on the otherside i have enough room for theDelta dust collection system, with the trash can seperator
Joe |
Joe,
Looks good, can't wait to see it in action!
How much room will you have with the ATC in place? In the picture it looks like it might be a little tight?
Bob