Here is a post from the VCarve Forum:
"Tony Mac
Vectric Staff
Joined: 30 Jul 2005
Posts: 751
Location: UK
New post Posted: Sat Jun 23, 2007 5:04 am Reply with quote
Tom,
VCarve Pro 4.0 is being released over the weekend and you will receive the details shortly.
The release information is being sent out based on the length of time customers have owned
the software, which we feel is a fair method.
We cannot release the upgrade to everyone in one go because the demand on the download
servers would be too great. So we are 'staggering' the release messages > downloads otherwise
the systems wouldn't cope.
Tony"
Hope this helps,
Bill Schober |