Hu,
Try this:
{G}{X}(s){G}{Y}(s){G}{Z}(s)(cr)
Don't forget the cairage return after the (space) after the {Z}. Or the program will strip the space out.
This will put a (space) after any lone / even at the end of a line.
This way you only have to find /(s) and replace with (nothing).
Again the(s) is a keyboard space. And (cr) is a cairage return, that is (enter).
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |