Originally Posted by Cory  Go to 'edit'
press 'prgrm conversational' 3 times
hit F2 and scroll down. Ours are at the very bottom. |
Select VQCPSV1.8, and like cory said it is probaby two up from the very last, program 9997? Until you do that you are just using the VQC not the probing.
When you select the correct program you will get 4 choices:
Spindle Probe 1-9
Spindle Probe 10-18
Tool Setting
Calibrate Probe.
What you would be looking for would be in one of the first two groups.