"i dont know sqat!!! feel free to ignore me"
If you invite people to ignore you they will. If you believe you don't know sqat, then no-one will listen. Simple.
You have good things to contribute because you are part of the CNCzone community and you will be amazed how much you will learn just by asking questions and researching.
That's what I did. I asked heaps of dumb questions when I started and it did not worry me in the slightest.
There were a whole stack of questions in your first post. Might be better to dribble feed your questions rather than dump too many at once.
Good luck with your project.
Andy
__________________
Drat, imperfection has finally stopped working!! |