With no knowledge or desire to do your own research and no money, my uncomplicated advice is to find another hobby. Nobody likes helping folks that want it all put on a platter for them. You're asking people to do all the work for you.
Learn to do some research, open your time frame, as you still need to learn programming once you have you machine made.
It is possible to do cheaply, but not for free. WidgetMaster was selling a similar machine to what you asked about for over $500 on ebay without the controls/motors/drives
Last edited by MrWild; 06-16-2007 at 11:24 AM.
|