I'm going to make a tap. I'll probably order the rod this week. I'm cutting parts and assemling my gantry and z-axis right now. (If I could stay in the garage). I'm also going to try to make a 8tpi, 2 start tap for the x and y drive nuts. But I won't get to that for a while yet, too many things to do around the house.
Gerry
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |