The "STAPPEN MOTOR VOOR 967599" looks like too small to me, it looks like NEMA17 Size and in general they are not recommended, normally they have too low torque to be useful.
The "SMC 1500 Servomotor" card, if it is for servos and not for steppers as the name says, will not work, you need a stepper card.
The "Zoltar kit 800" sounds good at least for the torque of the motors although the price is somewhat expensive, specially when you can scavenge a laserjet II for 5€ and get these kind of motor.
I cannot speak about the card of the kit, do not have enough info about it.
Last edited by Ferenczyg; 04-12-2004 at 07:36 AM.
|