I am happy with my Tormach. I make all the parts for my focusers see:
http://www.clementfocuser.com and the Tormach is doing a great job so far. I use SprutCam to create most of the programs that run on the Tormach. My parts are modeled in a 3D parametric modeling program and imported as IGES file into SprutCam. SprutCam is a bargain when bought with the Tormach and is at least 20% the price of comparable CAM software such as MasterCam. Tormach PCNC is at least 20% the cost of almost any VMC and the TTS is a good inexpensive alternative to more expensive toolholding systems.
Don Clement
Running Springs, California