[QUOTE=GunPilot;296761]
I used the .5" MDF for the x skins as others have. That is one strong box. I had the HD guy cut them for me on his big saw, and even though the sign said "NO precise cuts!" I asked him to get it as close to 24" as he could. He nailed it, and the parts snapped in place.
Welcome to the club. Have fun ask as many question as you need to.
I to used 1/2" MDF on my X torsion box the only problem I had was I had to notch the gantry (right side) so it would fit right.
Looks like I miss spoke myself I just can in from the garage I had to notch the X torsion box right side top skin 1/2" MDF so the adjustable bearing block would fit.
Rick
Last edited by rdhharm; 05-13-2007 at 01:39 PM.
|