Originally Posted by Post1952  Hi
I am new to the forum and anxious to build this Joes great look CNC machine. After thinking about it a short time I have decided to hand make the parts. I have down loaded the DWG drawings and have added the dimension so I can cut out all the parts. With Joe's permission I have uploaded the drawing they are in DWG & DXF format for those how needs them. If anyone has any question about the drawings please leave a post. As I progress with this project I will have a lot of question especially about the wiring & calibration cense I have little knowledge with that part of the build. I will also be looking forwarded to the comments from everyone. Cutting the parts out may take some time before the build & posting of any question & pictures.
Thanks in advance |
I too am going to make the parts myself. As much as I would like to just buy a kit from Joe to show my appreciation for all he has done I just can't right now.
I would like to say thanks to Joe for the great design and thanks to you for the dimensioned drawing. My only question would be the depth of all the routes that do not go all the way through. But I don't want you to have to go through all that trouble to get them. I will try to get them myself. If I get them before the next person does I would be more then happy to post a updated drawing with this added to it. But of course I would need Joe's permission. But any ways Thanks to the both of you.