I purchased a 4 X 4 Torchmate 3 w/ Torch Height Controller and running a cutmaster 151.
It was quite a learning curve for the CAD and im still learning, but overall I am fairly pleased with what i have.
Unfortunately some of my customers require some fairly clean cuts and holding a .005 tolerance or better. So far that has not happen therefore i have had to move on to doing things for other customers that dont require such tolerances.
It was unfortunate to lose them, and im still not sure whether it is me or the machine thats not producing what i want consistently.
Torchmate has been very helpful in all aspects, and i have no regrets towards them at all.
Dave Boyd
Inglis, FL
Boyd Welding Services |