MT,
Try these: http://www.freemansupply.com/index.htm
They have molding supplies and should have a release. http://www.epoxi.com/main/home.asp
They should have an Urethane wax release. http://www.gypsumsolutions.com/resul...%20prototyping
Look for the "Rayite" product. Not a wax but some neat stuff.
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Last edited by wms; 04-04-2004 at 08:46 PM.
|