When I first bought NT4, It was not long after I bought a "top of the line" Pentium 166. I paid $1200 for the processor alone, as it was about the fastest available at that time. I still use NT4 at work on a 750. Its a bit quicker than Win2K, and uses about 50% less memory, if you can deal with it's limitations (no USB).
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |