Mike, I just got their catalogue, and there is plenty to choose from. i like the look of the 80x14 grade 5 extrusion (Page 68, item number 0.0.370.85) for my table top. If you have the catalogue, and 5 minutes, could you let me know your opinion please. i am looking at cost as well as functionality, and even at this size, it will cost me £165 + delivery for my table. It will be the holding power of the slots that worries me a bit, I can deal with the "sag", since the table has angle-ali bars across it every 300mm or so. Thanks, Jason. |