I have the VM/16 back up and running but still wonder why it was having a fit.
The program was blocked stepped up to the point of the problem but it makes no sense. The program reads as follows: N2000
G00 X2.600Y2.00
T12 M06
D12 G43 H12
M08
S2200 M03
The failure was at G00 X2.600Y2.00 .When this line was moved down past the tool change the problem went away. also if the tool change was removed from the last program block there was no problem. Why would an X,Y or tool change affect the Z axis ? Thanks for the help |