Hi all,
I ran a Hurco VM1 for maybe 4 months last summer. It was my first CNC experience and it was a blast......About all I did was use dxf drawings from Solidworks and assign my feeds, speeds, etc...Pretty basic stuff...
To make a long story short I left that company for a design job...full time design isn't as exciting as I thought. Now I have an opportunity for 1/2 design 1/2 cnc and couldn't be more excited. The company has a VM2 and a few old Hawks...Now my question is, does anybody know of any Hurco specific publications? Or even a good "all around" CNC book? Basically, like I stated earlier I have some experience and a TON of learning to do. Any help is much appreciated. |