Originally Posted by InspirationTool  I was going to say McMaster for a source, but I just checked, and the nylon locking screws are only in US threads, not metric. I'll keep looking.
I may have to try the teflon tape.
-Jeff |
I have found if you cannot get nylocks, to either double nut if theres room or use parafin wax, paint, rtv, and even a dap of wood glue all work. The chinese seem to use there own class of fit, most people have found it easier just to toss there locking screws etc and use regualr metric stuff from the hardware store or where ever.
chris