I take you will need a wood router to make the guitars? A good place to start would be the cnc-router section of this site, there are many professional quality machines in there, with plenty of ideas to get you going. Once you have some ideas, then come back and check them out with the pros. If you live anywhere near Southampton, you are more than welcome to stop by my place and take a look at my machine, a home-built 4' x 2' cnc router. You will find that the prices of almost everything you need are way cheaper in the USA, so think about importing them. Items from ball-screws, to bearings and servo's can be had for big discounts over there. Don't discount ebay either, as there are bargains to be had. I hope this helps! |