EMC boot sequence
Turn off all four LEDs
Send two blanks (char20) to LCD
Turn on LED 3 only
Test LCD RAM
Turn on LED 4 only
Test rest of RAM (probably unused RAM only)
Turn on LEDs 3 & 4 only
Test A to D converter AD7581 (feedrate over ride)
Turn on LED 1 only
Test/configure timers 9513A
Turn on LED's 1 & 3 only
Test/configure inturrupt controllers 9519A
Establish stack
Clear RAM from EFD2 to FDD2
Clear tool table (probably skipped if conditions are met)
Start LED 2 blinking |