Actually it's a pain to mount, as the exsisting compound has a post to mount on! I will be making a plate which straddles the top of the carrage, and fits over the boss. Then I'll add a few SHCS to fasten it to the carrage.
Most turret lathes use long solid tool holders to turn long diameters, but after 5 or 6 inches they are not very accurate and the part requires a support center!
The turret will be an accessory, and with a few screws is ready to go!
I have been wanting a turret lathe, as I've been running off lots of 50 pcs of little parts, and the Quick change tools I use have not been very efficient!
It seemed to be more economical to make a turret lathe than to buy one!
I hope I don't eat my words!!
Widgit |