Originally Posted by dalworth  I have a Brand New Hurco VM1 and have had nothing but problems with Thermal Expansion.... I run an 18 min warm up program and when this is completed I am still getting .002 to .003 expansion in the X and Y-axis for the next couple of hours. I have come to figure out that the expansion is in the Head and not in the table. I can run just the spindle at 8,000 rpm with the table stationary and get the same expansion I get with the table moving. If anyone is having this problem or similar problems I could sure use the help.... |
i have to agree with you. our hurco loses it's position if you shut the main power off. the control in the ISNC mode is the most cumbersome one i have ever used