Hey folks, I admit it. I am one of those "lurkers" on the forum....at least until now. I have read just about every post that's been made regarding Joe's 2006 and decided that I must have one. My first machine was a Kleinbauer PipeDream and while I learned a lot using it, I'm really looking for more capacity/cuttting area. My main interest will be guitarmaking but perhaps VCarving a tennis shoe might be an interesting challange
I thought about cutting out the pieces myself, but you guys have made this forum so interesting and exciting, I decided to have Joe provide the kit so that I can get going quicker. To date, I have purchased ALL of the hardware and now just waiting on Joe....no pressure here, Joe!
I hope to be able to count on you folks for assistance through the rough parts but I am certainly up for the challenge. I got to tell you all....this is probably the ONLY forum that I have read all the way through. I found myself reading faster to get to the answers to some of the questions and have completely enjoyed the whole experience so far. I'm really looking forward to showing off to you guys.
Since this is kind of my first real post (at least in this thread), I thought it would be a good idea to let you know what I'm working with:
HobbyCNC electronics with 200 oz steppers. 42V 10A
Mach3
VCarve Pro & Cut3D (awesome products!!)
AutoCAD
That's it for now but I am looking forward to becoming a part of "Team Joe 2006" and I hope to meet a bunch of you at Jay's User's meeting.
AWESOME WORK ON THE MACHINE, JOE!
Regards,
Joe uh oh.....another Joe!!