The Shop Owner is still using MC V8.1.1 on a PC with 6MB Graphics RAM, 256 RAM, and a Pentium 3 LOL
He just WON a HUGE Contract with a Large Company. They want him to UpGrade ASAP. Their Designers use Catia V5 to Model the Molds.
As for the Dual Xeon Processors, MCX2 isn't setup for it, but I was told that you can Asign a Dedicated Processor by changing the Affinity to CPU1.
That means all your other Softwares can be set to run on CPU0.
How fast do you guys think it will be having MC on a Dedicated Processor?
An External Hard Drive is a good idea. The PC is going to be locked in a separate room and Secured to a Desk.
What do you think about the Pollywell Builds?
http://www.polywell.com/us/cad/