On the mill (see below) its a Samsung with a touch panel addon. The Lathe is a new ELO Kiosk screen I got on eBay. The Samsung is a resistive type and the ELO is a SAW type. I was told that the best type to get was capacitive but have never had a problem with the Resistive on the mill. The one on the lathe however could be a problem as I have found out that coolant splashed on it can activate it. It wont be a problem for the lathe as it will be nowhere near coolant but I thought I would mention it as it would be a problem on the mill as mine regularly gets covered in coolant.
Hood
