I did some searching myself and everyone seems to be overall happy with their machines. From what I have read the lathe part is as good as any other lathe, but the mill is a bit of a compromise in rigidity compared to a dedicated mill, still the best on the market as far as multipurpose machines go. I ordered mine for the April shipment, same set up as you are talking about, cnc and ballscrews, I am probably going to add the DRO before I pick up, just because I can get the lifetime warranty on that also if I buy it with the machine. I am excited about getting the machine. One more thing, the price of raw metal seems to be going up, I would recommend ordering one before the price of the machine goes up as well. I speak from experience, if I had ordered mine 3 days earlier I would've saved $200 and gotten it a month earlier as well. Also if you are serious about getting the machine email, I have a tip that can save you quite a bit of money. |