I ran out at lunch today and scored big. I hit the plastic store first:
1 - 2'*4'*3/4" HDPE
1 - 2"*6"*12" UHMW to try and make some dampeners out of
Then to pricess auto (made me late for work... but it was worth it).
Man right there on the shelf hundreds of the little puppies. $3CND each for each side and $2 for the middle. That make $25 for all 3 sets very similiar to the love joys I already have for 1/4 stuff.
As well I finally found my nice big red panic button they had tons of them. Will be replacing the light switch I have soon with the BRB.
I was really hoping they had the cable management system like David has on his machine but my luck ran out there.
As well I was hoping they had the 1/2" bearings but they only had 12mm bearings. I bought 1 just in case, but think it will be a little small for the 1/2 rod (will check tonight at Home Depot). |