Hi George.
Are you just now getting started in Mach2 setup? If so you might want to go to the yahoooooooo groups and try this link
http://groups.yahoo.com/group/mach1m...guid=169082179
I wish we had a lot more folks here that were Mach2 users. You can also email Art directly but when you see how busy he is you will understand it takes him a little to answer.
If you would like to explain a little more detail in waht you are needing I will help if I can.
1. Have you got motors wired and moving?
2. Are the motors moving your machine?
3. Have you gone thru your config setup yet?
Answer these three to start with and we will go from there.
Mike