Thanks guys for the quick responses.
ccsparky, the router mounts and 1/2 pieces have not been aligned for cutting out for two reasons 1/2 pieces will be moved to a different drawing layout, and the router head need to be redone to accomondate the tool changer stuff and 4.5 Dust collector hose. If anyone has the plans for the z axis head with the 4.5 Dust collector hose and preparing for the Tool Changer (I allready have the attachment for the router).
The maximum size I can machine is 21.5 * 32.25 the machine area is smaller than this, still working the layout of all the parts to fit nicely in this area.
Joe
Thanks for the advice on tapping, I will implement this change.
Machining will probably not begin for a while as I figure everything out in my head first. For sure I will be posting pictures... as I did for the last machine.
www.cncmachine.phillipsfamily.ca