Originally Posted by Weldtutor  Congratulations & thanks for the photos!
It looks as if you are off to a good start!
That beam & rail looks just like your drawing a couple posts back.
The Hobart MG in the last photo, is like one that I have fed miles of wire with. |
That old rascal has the best arc of anything in my shop. In fact it may be the best MIG welding machine I have ever used. If it just wasn't so noisy LOL. I mainly use it anymore as a back up machine. I ran it for about a week & 1/2 recently. The fan motor went out in my 400A Linde (another piece of history). ESAB didn't have a replacement on the shelf. so I had to improvise. Thank goodness for Ebay.....