Exhaust valves are one of the items I am waiting to arrive. At first I didnt think about it but then I realized that because some of the check valves that I am using the cylinder would expand but then not release so I ordered some exhaust valves.
In terms of getting the cylinder to expand before the impact starts spinning, I changed how the air goes into the system. The incomming air goes through a "T" fitting but goes straight towards the air cylinder and the air has to make a 90 degree turn to go toward the impact gun. So hopefully this will give me a slight delay allowing the cylinder to activate first.
I am going to mount it and do some tests today, so I will let you know how it works.
Vince |