Originally Posted by cncuser1  Take a look at Sherline Industral spindles.
They have a couple of different spinddles availablle, choices of bore, housings and motors with controllers. |
The 6512-ER-16 looks ok, but I can't find any info on the maximum end mill/face mill sizes it can hande. Will search the forums to see what I can find.
A noticed the taig spindle assembly (both normal and ER16) is available seperately without the head stock, so that may be a better option than I originally thought.
I'm missing one important piece of infomation: the size of the hole in the X1-spindle housing. No dimensions on the assembly diagram in the manual.