Originally Posted by Mudflap  I had a similar problem on my 2001 ML-20. It would just fail to run, or stop and show an error. It's been long enough that I don't remember the error, it may have been E-stop. We couldn't find the problem, we were ready to send the control in to Milltronics for them to repair it to find the problem. It turned out to be a failing microswitch on the chuck safety guard. |
I had the same thing happen on an ML15 and I can't remember if there was an E stop error.
But, I had the spindle lube pump act up and it was giving me an E Stop.
enat