Originally Posted by regwharton  I have recently purchased bobcadcam v21 . I recieved a model of a part that was drawn in solidworks. Is there anyway that i can create a toolpath from the solidworks model. Any help will be appreciated.
Also, I'm Iwant to run program on Matsuura 760v / yasnac mx1 control. Have to run DNC, Anyone know how to run from pc.
thanx much,
REG |
Reg,
BCC V21 will open a SW File (*.sldprt)
Wether it is a Solid Model or Wire Frame BCC will create Tools Paths. It just takes a little time to get used too.
Here are two other Forums full of BCC Users
http://216.117.147.20/bobcadsupport/forums/index.php
This one is Sorin's Forum(CAD/CAM Trainer.com). In case you didn't know, Sorin is the Official BobCAD/CAM Trainer. Register on his site. You will get a Password to his FREE Video Tutorials. As an added plus, he is a Real Machinist that Applies the Software to Real Machining Situations.
http://cadcamtrainer.com/forums/index.php
Cheers
