I need to check on the TL-3 but I know for sure that the TL1 & 2 have this issue.
(
We just got Lathe for our mastercam seat and we have a TL-1 so I hope to clear some things up from reading this thread before I start bugging Jay too much) Oh know who you get that from ? Call me I can help I know for the TL-1
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |