Originally Posted by One of Many  I have a Morton M5 Radial I have been building on, just no pics and my camera just died.
Other than that I have done some rebuilds on model airplane engines, like con-rods, carbs and prop nuts. Modified a couple weed wacker engines for R\C to glow, including mounts and prop adapters.
I also have the Mizer Sterling low temp engine in the works.
DC |
Sorry about the camera. I would love to see your work. The morton is a nice looking engine. Castings are a little pricy but worth the extra coin.
Not as complex, but i have plans for the 370 pip, 3 cylinder. Looking forward to that. I am thinking of springing for ageless engines 9 cylinder plans. If the pip goes well, i'll try the 9. Would like to also take a crack at the ken hurst V8. Again the castings are alot of money, but worth it when finished.
http://www.littlelocos.com/pip/ 370 pip
http://www.agelessengines.com/9cyppic.htm 9 cylinder
http://www.nvbackflow.com/engines/ V8