Thanks for the replies. I tried a couple of things and got mix results. I tried the leadin and also changed the cutting direction. I was cutting clockwise and changed it to counter. The marks are completely gone!! By changing the direction I am now seeing a layering effect on the side of the part. You can tell exactly where each cut depth was. When I was cutting the other direction it looked like I cut it at one pass. This was an issue I had on my jrgo and now I see on my new machine. Any suggestions? I am cutting 1/2" mdf, at 35 ipm, 1/8" upspiral, 4 passes.
Thanks
Dave |