Originally Posted by Dugg  I've had some difficulties with chamfer tools in that I now input .062" for the tool tip and the same .062 for the tool diameter. I use tool comp with lead in and lead out, set the Z at -.035 and then use changes in the Z and D to get the edge I'm looking for. I'm sure there's an easier way, but I plod alone with what I know hoping to learn more. |
There is an easier way...
I define my tool exactly as it measures. I set the chamfer dialog exactly as the work piece requires. I get a chamfer that is exactly right. There is no smoke and mirrors involved with this feature.
What difficulty have you had ?