I think the problem is not that noone could or would help but did not understand what you are actually wanting. Even a Bobcad employee helped but not enough information to understand there was still an issue. (remember most people on these forums are users just like you)
So you are trying to add a corner radius to a solid part? What happens when you use the fillet feature? Do you get an error? What error do you get?
Bobcad (along with many other cad programs) have a difficult time adding a radius to very sharp corners. These knife like edges may not be filleted because the fillet removes the top surface. Try a very small fillet for a test first. |